Bluetooth Headphone Testers Required

[rjonas]

Originally Posted by rjonas

I was able to pair an Axim 51v with a Motorola HT820. The Axim has the Dell Axim X51 QVGA System Update (released 7/3/2006) for Windows Mobile Version 5.0 installed. Audio is rich and HT820 remote functions are fully supported.

The instructions are unclear at one point. Step 8 says, "Tap and hold the client, and set it as Wireless Stereo" but it's a tap operation, not tap and hold, at least on my machine. But this is a quibble - installation was a snap. Many thanks.

Follow up message: It turns out that although his procedure *does* allow you to pair an Axim 51v with a Motorola HT820 for high quality A2DP audio playback, the microphone built into the HT820 seems to be disabled. So if you were planning to use this combination for VOIP, such as Skype, you'd be disappointed. It's not clear if this is a result of the A2DP pairing procedure described here, a consequence of WiFi versus Bluetooth interference, or some other cause. In any event, VOIP seems to be out of the question with this combo.

[jimt853]

Originally Posted by l0l

If you have an Axim X51v or X50v running Windows Mobile 5 and a Bluetooth Headphone you'd like to use with it, try this:

1. Extract the A2DP.ZIP file to a folder and copy the contents to your Axim:

A) tor_a2dp.cab

B) tor_a2dp_cert.cab

C) 3 DLLs avrcp_mpplugin.dll, bta2dp.dll, sbc.dll

D) a2dp.reg

2. Copy the three DLL files to \My Device\Windows and put the cabs and reg file into one directory.

3. Click on tor_a2dp.cab to install.

4. Click on tor_a2dp_cert.cab to install.

5. Turn power off completely or soft reset to register the changes.

6. Turn unit on. Go to:

Bluetooth > Devices> New partnership

7. After your BT stereo client is ready to pair, select "Wireless Stereo".
You may have to use a passkey if your headphone specifies, ie: "0000".

8. Tap and hold the client, and set it as Wireless Stereo

DONE.

If you are successful, please post back and include:

A. The device (e.g. X51v) and the BT headphone model that you used.

B. How you made it work if you encountered difficulty.


Credits:

Thanks to everyone involved at the XDA-Developers.com and the pdaphonehome.com forums.

References:

1. http://forum.xda-developers.com/viewtopic.php?t=48502

2. http://forum.xda-developers.com/viewtopic.php?p=275438

3. http://forum.xda-developers.com/viewtopic.php?t=48491

4. http://www.pdaphonehome.com/forums/s...ad.php?t=71436

Edit
When you download the attached file "attachment.php", don't forget to rename it to "a2dp.zip".

I am unable to copy the dll files to the windows directory since they are "read only, system files", and older, smaller files already exist in the windows directory.

Your suggestions would be appreciated, since I am new at using the Dell x51v.

Thanks, Jim

[Thyfalcon]

I have the AXIM x51 using the Motorola BT headset.
I'm thinking maybe for some of the axims, there needs to be a BT firmware update of some sort. I didn't see on my device though, who is the BT manufacturer.

[captainhog]

Got it to work on my first try!

I paired my Logitech stereo headphones to my Cingular 2125, and it worked right away.

Thanks for the great info!!

[pawel2606]

my device was IOgear stereo headphones somehow got paired with my axim but........ it playes music non continously
somebody know what to do with that???

[Isaac Beck]

Originally Posted by l0l

If you have an Axim X51v or X50v running Windows Mobile 5 and a Bluetooth Headphone you'd like to use with it, try this:

1. Extract the A2DP.ZIP file to a folder and copy the contents to your Axim:

A) tor_a2dp.cab

B) tor_a2dp_cert.cab

C) 3 DLLs avrcp_mpplugin.dll, bta2dp.dll, sbc.dll

D) a2dp.reg

2. Copy the three DLL files to \My Device\Windows and put the cabs and reg file into one directory.

3. Click on tor_a2dp.cab to install.

4. Click on tor_a2dp_cert.cab to install.

5. Turn power off completely or soft reset to register the changes.

6. Turn unit on. Go to:

Bluetooth > Devices> New partnership

7. After your BT stereo client is ready to pair, select "Wireless Stereo".
You may have to use a passkey if your headphone specifies, ie: "0000".

8. Tap and hold the client, and set it as Wireless Stereo

DONE.

If you are successful, please post back and include:

A. The device (e.g. X51v) and the BT headphone model that you used.

B. How you made it work if you encountered difficulty.


Credits:

Thanks to everyone involved at the XDA-Developers.com and the pdaphonehome.com forums.

References:

1. http://forum.xda-developers.com/viewtopic.php?t=48502

2. http://forum.xda-developers.com/viewtopic.php?p=275438

3. http://forum.xda-developers.com/viewtopic.php?t=48491

4. http://www.pdaphonehome.com/forums/s...ad.php?t=71436

Edit
When you download the attached file "attachment.php", don't forget to rename it to "a2dp.zip".

Hello users,
I am new to axim and have some questions. I followed instruction how to install A2dp file and encountered problem: I can't erase old files in the windows folder of my devise. I can't replace them with the new files because they have read only property. I can't change property option for these folders in order to replace or erase them.

Please help.

[bs1000]

Why x51v doesn't work with Mot H700? Option greyed out

[pawel2606]

works perfect

[Dee]

I've a used AximX51v. I just got the Motorola HT 820 stereo headphones. This download worked perfectly the first time through. Thank you very very much!!!!!!!!!!!!!1

[dgs]

Originally Posted by ranmasaotome

After Tidous Searching i finnaly have found a fix for this problem
Go to http://www.aximsite.com/boards/showthread.php?t=122247 There they have a bluetooth stack related from widcomm, Its a cab file that installs onto ur axim. I Have a A12 x51v and its working nicely with it. I was finaly able to connect my WBT212 Jensen... And Syncing works perfectly, also file management. Enjoy this find , Also they keep updating it. Great news i hope u enjoy it.

Hi I had the same problem as others, not being able to overwrite the existing DLL's. (Im using a Blueant X3micro head set and Axim x51) I downloaded this stack and installed it without any problems, and it worked first time, sound volume is a little low but usable (the X3 is a very small headset), skype works well. Thanks Guys Ill send a donation as soon as I figure out how (Im a Newbie)