Axim X3i stuck on screen align

[stanwinchester]

I have an Axim X3i and I have attempted the repair as described at Replacing Digitizer, but it is still stuck on screen align. I have noticed on eBay I can get a new digitizer for about $20 and wondered if this will fix my problem?

I have cleaned everything, done a hard reboot, attempted cable repair, and it is still stuck on screen align.

I should also mention before the hard reboot everything worked fine, just the alignment was off.

Thank you,
Stan Winchester

[Mahstah]

It certainly sounds like a hardware problem if, after a hard reset, the alignment problem persisted. The repair you linked to is really for an X5- different hardware than the X3.

You should first remove any screen protector and make sure there isn't any dirt between the chassis and the screen. If it's clean, you should get a new digitizer.

Good luck!