Thanks Drifter. I showed it to a techie upstairs (at work), and he said I should try soldering it. I used a very sharp pencil tip soldering iron (dry - without adding any more solder), and just pressed each terminal down into it's place. The hot solder stuck to both surfaces again, and bridged the gap when I released the pressure on the hot iron, and the treminal sprung back up. I had to use a 15x magnifying loupe to see what I was doing.
Everything appears to be working now, but I will try syncing and charging when I get home and give an update. I'll also move the cradle up a little higher so curious hands can't reach it.
Thanks again,
Jack
