My Axim x50v is not syncing/charging reliably. I took it apart and found that the sync connector has come disconnected from motherboard, probably from someone wiggling it while it was in the cradle (aren't kids great?). All the leads coming from the back of the block are just laying on top of their terminal spots, and they move if I wiggle the connector. Not good.
My question is - are the terminals on the connector soldered to the motherboard or are they silver-epoxied like the battery leads? I have the ability to solder it, but I don't want to try if it's not solder I'm looking at.
Thanks, Jack
