|
I've experienced this a few times on an IPAQ and found it to be a bad connection.
If activesync is installed correctly and all is working OK, the PC should report the presence of the Axim almost imediately and you should hear pings from both the PDA and the PC.
Belt and bracers, job, but Microsoft do tell you that Activesync should be installed before the first connection of the PDA , otherwize connection problems can occur.
? Test the cable.
Do you know someone with a PC that has active sync runnimg correctly ?. If so try plugging your axim/cable into their PC, it should register.
? If above test OK, then de install Activesync and also power down the PDA until internal batteries are flat and all data is lost ( remove back up and main batteries). Re install Activesync and also restart the PDA.
Hopefully you should see it register.
__________________
Drifter
|
